Using a
Dynamometer,
is like using a
Stethoscope..
Daily use..
Using a dynamometer is like using a stethoscope..
With some reservations and questions, many therapists starts
finally to use a dynamometer…
A Neurologist from the Martini Hospital - Groningen - The
Netherlands discovered after a while that he carried the
dynamometer - during the hole day - with him. It’s like a
stethoscope, he said!
Visiting his patients, a fast objective indication can be made.
After some years of manual testing, he appreciates the quick
muscle force measurement with the dynamometer to check
the effect and the progression of the treatment.
The most important issue during dynamometry is measuring
the patient muscle force on the same place at moment “A”
and at moment “B” to compare the values, he said!
Measuring your patients on the same place takes some training and
discipline...
F.e.: measuring the backward muscle force of the neck, always place the
dynamometer on the same level on the back side of the head of the
patient - just follow the horizontal line of the top of the ears of the patient.
Only with discipline and consistently force measurement on the same
place leads to the right indication of the dynamometer value!
Service & info
Leaflet & Info
Tensiotec TC series
Tensiotec TC-E series
Printer
EDMS Software
Tensiotec on youtube
Manuals & Info
Tensiotec TC series - user manual
Tensiotec TC-E series - user manual
Calibration TC series - user manual
Calibration TC-E series - user manual
Request for calibration on demand
Calibration
The ISO 376 and ASTM E 74 standard cover the calibration of tension
and compression load cells used for the static verification of and
uniaxial testing machines, such as tension/compression testing
machines as dynamometers, and describe a procedure of instruments
classification.
Boerlaan 22, 9321XD Peize, The Netherlands
+31 (0)50 503 28 35
+31 (0)6 494 242 66
info@Tensiotec.com
http://www.Traduscom.nl
Research in force measurement..
Research in force measurement in healthcare leads to an
innovative force measuring product: The Tensiotec.
Traduscom starts with this handheld push and pull force
measurement product after a long term evaluation of a lot of
products in the field.
So many users, and so many wishes of force measurement in
different healthcare disciplines leads to different applicators.
Measuring upper body force in eldery created the needs of
pull applicators and force measurement in the upper
extensions needs a special shaped push applicators.
Choose the basic set of applicators or if you can’t find your
right applicator..
Contact us and we make your own applicator for your
Tensiotec.
Calibration
Dynamometers are sophisticated measurement
instruments. As any measurement instrument they need to
be calibrated regularly. In some countries there is even a
legal obligation to do this with a frequency of once per year
or once per 2 years.
With a Tensiotec, you have the possibility to choose your
way of calibration!
Do it yourself with the built-in calibration program
We do it for you
If you have many Tensiotec dynamometers and you have a
calibration department, you may consider to do the calibration
device yourself using certified calibration force weights and
following the steps in the manual.
A calibration on demand is also possible with the Tensiotec. We do it
for you as a seperate service.
Get in contact with us by E-mail, make a request for calibration and
we send you the actual calibration price and we provide you with a
calibration service number.
After receiving your Tensiotec for calibration, we start the calibration
procedure and send your Tensiotec within +/- 2 weeks back with a
calibration report based on the ISO 376 standards.
Tensiotec - the rechargeable handheld dynamometer!